• Follow us
Easy-maintainable High Efficient Industrial Advanced Conveyor Belt Dryer

Easy-maintainable High Efficient Industrial Advanced Conveyor Belt Dryer

Belt dryer is an ordinary continuous drying equipment. It is widely used for chemical industry, food stuff industry, pharmaceutical industry, construction materials industry, Electronics industry and so on, especially it is suitable for drying raw materials that are good in breathability and have the shape of pieces or strip of granule, it is also possible to dry the raw materials such as filter cake after shaped by granulator or extruder

Description

Belt dryer Introduction

Belt dryer is an ordinary continuous drying equipment. It is widely used for chemical industry, food stuff industry, pharmaceutical industry, construction materials industry, Electronics industry and so on, especially it is suitable for drying raw materials that are good in breathability and have the shape of pieces or strip of granule, it is also possible to dry the raw materials such as filter cake after shaped by granulator or extruder

Dryer Features

1) Hot air bottom-up and top-down cross through the material, increasing the contact area between the material and the hot air and improve the drying rate.

(2) the entire device materials used in line with the food, pharmaceutical requirements for production of stainless steel. Ensure that the device is easy to clean, no water inside the device phenomenon, to ensure the cleanliness of each drying items. Making the production line with food hygiene requirements.

(3) Adopt fully enclosed structure, Except  the humidity pipe, it has no outer duct, thus ensuring the material is not contaminated, improve thermal efficiency, improve working conditions.

(4) uses a unique internal air supply means, not only improve the relative velocity of the material with hot air, to improve drying speed, but also to ensure uniform material drying.

(5) steam heating device placed separately on the side and below the belt, and the heater air intake plus a special set of filters, filtering only the fines and debris within the circulating air, and to ensure that the internal heater clean; side of the device while still open manhole access door, you can easily access to all parts of the dryer, easy access, easy clean.

(6) Drying section with several units, each unit can be independently controlled by the temperature cut-off valve, and has a digital display device can be greatly improved operability.

(7) All key components are made of well-known manufacturers of products, to ensure the long-term normal operation of equipment.

(8) belt line speed can be visually displayed on the electrical control box, and can effectively control the final moisture material.

(9)Air inlet filter ensure clean air intake.

(10) Circulating fan is a centrifugal fan, low energy consumption, large Pressure, hot air penetration rate.

Dryer Principle

The Raw Materials to be treated should be distributed on the conveyor Screen Belt. The Screen Belt is made from 12-60 mesh of stainless steel wires. It will be moved inside the direr through driving apparatus. The Dry Section consists of several units, each unit uses hot air circle Separately. In which parts of tail air are discharged though fan, the discharged air amount is controlled through regulation valve. At the upper circle unit, air from circle fan enters into the low chamber of unit through side duct. Air steam to be heated is up forward through heat exchanger and then is distributed through distributer and finally air passed through the layer of raw materials. The air duct of upper chamber is connected with inlet fan. Most of air steam is circulated. Small parts of air that is low temperature and contains more moisture will be discharged through moisture removing duct, regulation valve and fan. At low circle unit, air from circle fan enters into the upper chamber first, then heated through heat exchanger and penetrates the layer of raw materials and enters into low chamber, the low chamber is connect to the inlet of fan through side air duct and air returning duct. Most of air steam is circulated, small parts of air will be discharged.

Application

Vegetable, granule feed, monosodium glutamate, organic pigment, synthetic rubber, propylene fiber, medicine plastic products.

Typical case

Dry material: Raw Vegetable

Feeder Capacity: 1000KG/h

Moisture content: 85% 

Product Moisture: 4-6%

Drying temperature: 60-100 ℃

Heating: Steam Exchange




Customized Design

Hot Tags: easy-maintainable high efficient industrial advanced conveyor belt dryer, manufacturers China, suppliers China, factory
Related Products

Feedback