• Follow us
Principle Of Spray Drying Applications

Principle Of Spray Drying Applications

1. Two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process . PLC controller, LCD touch panel control fascia with flow path of system. Using proface touchable interface display operation, operator can control temperature, airflow volume,...

Description

1. Two modes of run: Automatic-mode, and Eye-monitored mode for the purpose of easily controlling experimental process . PLC controller, LCD touch panel control fascia with flow path of system. Using proface touchable interface display operation, operator can control temperature, airflow volume, air pressure,pump speed and de-blocker frequency.

2. Spray chamber, cyclone separator, receiving tank are all made of Borosilicate glass which can resist strong acid/alk li, high temperature. It can work in a no-pollution and stable environment, and the whole process can be inspected. All the spare parts are easy to install and wash.

3. To assure accurate temperature control and easy parameter adjusting, YC-015 applies PID.

4. A filter has been equipped to the inlet unit to prevent the sample from contamination .

5. The self-priming peristaltic pump delivers the sample liquid from a container through a small diameter jet into the main chamber to avoid secondary pollution.. To make sure the process conducted steady and smoothly, magnetic agitator is optional to make the solution well mixed.

6. Narrow size distribution of particles.

7. Automatic de-blocking device prevents the nozzle from becoming blocked and variably controlled.

8. Supplied complete and ready for most spray drying applications.

9. Automatic de-blocking device prevents the nozzle from becoming blocked and variably controlled.

10. Equipped with air filter to remove and collect fine particle s in exhausted air.

Related Products

Feedback